ACTi B916 Quick Installation Guide

Quick Installation Guide
This guide contains the basic information you need to quickly setup the
Camera. For detailed information on installations or operations, please refer
to the Hardware Manual and Firmware Manual on ACTi website
(www.acti.com).
Step 1: Unpack the Device
Check the camera package and make sure all items are present. The
complete package list is shown on the camera Hardware Manual.
Step 3: Connect the Device
Basic Connection Example
Camera
Step 2: Mount the Device
Mounting varies per camera model. Check the most suitable mounting
method from the Hardware Manual or from our Mounting Accessory
Selector Tool (www.acti.com/mountingselector).
PC
Power Source
PoE Switch
Camera
Camera Camera Camera Camera Camera
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com

ACTi B916 Specifications

General

Device Type	IP Camera
Connectivity Technology	Wired
Sensor Type	CMOS
Frame Rate	30 fps
Lens	Fixed
IR Range	30 m
Infrared Distance	30m
Day/Night	Yes
Ingress Protection	IP66
Sensor Resolution	4MP
Lens Type	Fixed
Minimum Illumination	0.03 Lux
Compression	H.264
Video Compression	H.264
Power Supply	PoE (IEEE 802.3af) Class 2
Operating Temperature	-20 °C - 50 °C
Features	Wide Dynamic Range (WDR)
Protocols	HTTP, HTTPS, TCP/IP, UDP, SMTP, FTP, DHCP, DNS, DDNS, PPPoE, RTSP, RTP, RTCP, IGMP, ICMP, ARP, UPnP, NTP, Bonjour, IPv6
Power Device	PoE
Compliant Standards	CE, FCC
Network Interface	10/100 Base-T