Need help?Do you have a question about the ACTi B51 and is the answer not in the manual?
Adhere to all warnings on the product and in the instruction manual for safety.
Do not attempt to service yourself; refer all servicing to qualified service personnel.
Conditions requiring immediate disconnection and referral to qualified service personnel.
Marks and drills holes on the surface for camera mounting.
Instructions for safely removing the camera's dome cover.
Attaches the camera to the prepared surface using screws.
Connects network, power, and other cables to the camera.
Adjusts the camera's pan, tilt, and focus for optimal viewing.
Reattaches the dome cover to the camera body after installation.
Sets up network IP addresses for camera and PC communication.
Utilizes IP Utility software for discovering and configuring cameras.
Manually assigns IP addresses to the PC and camera for network connectivity.
General| Device Type | IP Camera |
|---|---|
| Form Factor | Bullet |
| Wired Connectivity | Ethernet |
| Resolution | 1920 x 1080 |
| Sensor Type | CMOS |
| Lens Type | Fixed |
| Zoom | No |
| Minimum Illumination | 0.05 Lux |
| Infrared Cut Filter | Yes |
| Infrared LEDs | Yes |
| IR Distance | 30 m |
| Day/Night | Yes |
| Video Compression | H.264, MJPEG |
| Frame Rate | 30 fps |
| Operating Temperature | -10°C to 50°C |
| Weatherproof | IP66 |
| Vandal Proof | IK10 |
| Network Interface | 10/100 Ethernet |
| Local Storage | MicroSD |
| Power Supply | 12V DC |
| Sensor Size | 1/2.7 inch |
To Next Page
