Need help?Do you have a question about the ACTi B61 and is the answer not in the manual?
Instructions on how to connect a DC12V power adapter to the camera's power terminal block.
Procedure for drilling holes on a surface for camera mounting, considering cable routing options.
Instructions on how to safely remove the dome cover for installation access.
Steps for physically mounting the camera onto the prepared surface using screws.
Guide to connecting network, power, and other optional cables to the camera's ports.
General| Device Type | IP Camera |
|---|---|
| Connectivity Technology | Wired |
| Sensor Type | CMOS |
| Resolution | 1920 x 1080 |
| Max Resolution | 1920 x 1080 |
| Lens Type | Fixed |
| Focal Length | 2.8 mm |
| Aperture | F2.0 |
| Optical Zoom | No |
| Digital Zoom | Yes |
| Infrared Distance | 30 m |
| Day/Night | Yes |
| Video Compression | H.264, MJPEG |
| Frame Rate | 30 fps |
| Ingress Protection | IP66 |
| Field of View (V) | 50° |
| Minimum Illumination | 0 Lux |
| Network Interface | Ethernet |
| Protocols | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP |
| Features | Motion Detection, Digital Noise Reduction |
| Power Supply | PoE |
| Operating Temperature | -20 °C ~ 50 °C |
To Next Page
