ACTi D21V Quick Installation Guide

Quick Installation Guide
This guide contains the basic information you need to quickly setup the
Camera. For detailed information on installations or operations, please refer
to the Hardware Manual and Firmware Manual on ACTi website
(www.acti.com).
Step 1: Unpack the Device
Check the camera package and make sure all items are present. The
complete package list is shown on the camera Hardware Manual.
Step 3: Connect the Device
Basic Connection Example
Camera
Step 2: Mount the Device
Mounting varies per camera model. Check the most suitable mounting
method from the Hardware Manual or from our Mounting Accessory
Selector Tool (www.acti.com/mountingselector).
PC
Power Source
PoE Switch
Camera Camera Camera Camera Camera Camera

ACTi D21V Specifications

General

Model	D21V
Device Type	Dome Camera
Form Factor	Dome
Environment	Indoor
Vandal Proof	No
Sensor Type	CMOS
Focal Length	2.8 mm
Aperture	F2.0
Zoom	No
IR Cut Filter	Yes
IR LED	Yes
Video Compression	H.264, MJPEG
Frame Rate	Up to 30 fps
Multiple Streaming	Yes
Wireless	No
Day/Night	Yes
Image Sensor	Progressive Scan CMOS
Minimum Illumination	0 Lux
Supported Protocols	TCP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DDNS, DHCP, ARP, Bonjour, UPnP, RTSP, RTP, RTCP, PPPoE, ICMP, IGMP
Ethernet	10/100 Mbps
Memory Card Slot	MicroSD/SDHC/SDXC
Power Supply	PoE (IEEE 802.3af)
Operating Temperature	50°C (122°F)
Maximum Frame Rate vs. Resolution	1920x1080 at 30 fps