EasyManua.ls Logo

ACTi D61 - User Manual

ACTi D61
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Indoor Dome Series
Hardware Manual
D61, D62, D64, D65, E61, E62, E63,
E64, E65, E66, E67
2014/05/07
Question and Answer IconNeed help?

Do you have a question about the ACTi D61 and is the answer not in the manual?

Summary

Precautions

Safety Instructions

Physical Description

Mounting Options

Installing the Camera on a Surface

Step 1: Drill the Holes

Instructions on drilling holes for mounting, considering cable routing.

Step 2: Open the Dome Cover

Steps to safely open and remove the camera's dome cover.

Step 3: Install the Camera to the Surface

Procedures for physically attaching the camera to the mounting surface.

Step 4: Connect the Cable

Instructions for connecting the network and power cables.

Step 5: Access the Camera Live View

Guide on how to view the live video feed from the camera.

Step 6: Adjust the Viewing Angle and Focus

Steps to adjust camera orientation, angle, and focus.

Step 7: Close the Dome Cover

Instructions for reattaching and securing the dome cover.

Other Adjustments and Accessories

Adjust Camera Viewing Angle and Focus

Detailed guide for adjusting camera view, focus, and pan direction.

How to Use a Memory Card

Accessing the Camera

Configure the IP Addresses

Procedures for setting up network IP addresses for camera communication.

Using IP Utility for Camera Discovery

How to use the ACTi IP Utility software for camera discovery and configuration.

ACTi D61 Specifications

General IconGeneral
ModelD61
Sensor TypeCMOS
IR Cut FilterYes
Video CompressionH.264, MJPEG
WirelessNo
ONVIFYes
Image Sensor1/2.8" CMOS
Focal Length2.8 mm
Minimum Illumination0 Lux (IR on)
Frame Rate30 fps
ProtocolsTCP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DDNS, DHCP, ARP, PPPoE, UPnP, ICMP, IGMP, QoS, IPv6, RTSP, RTCP, RTP
Ethernet10/100 Mbps
Power SupplyPoE, 12V DC
Network Interface1 RJ-45 10/100 Mbps Ethernet

Related product manuals