playback of play items and the possibility of interaction with the user through the remote control or
some other input device available. If PCB is ON, the player won’t auto start after inserting the disc
because it will take time to select program on disc; if PCB is OFF, the player will auto play the program
on disc one by one.
• To turn ON PBC function, press PBC on the remote control. To turn OFF, press the button again.
Note: Not all VCD/SVCD disc have PBC functions.
Specifying Track
Press NUMBER corresponding to a desired track number during playback. The number is displayed
and playback starts from the selected track.
1. Make sure to turn off PBC feature first.
2. Using the number pad on the remote control, enter the desired track number.
Note:
• To select 3, press0, 3.
• To select 13, press 1, 3.
• To select 23, press 2, 3.
Changing audio language during playback
VCDs can provide audio playback with different languages. It is usually separated into 2 channels (left
and right). With VCDs featuring multi-audio recordings, you can switch between languages/audio
systems during playback.
• To choose different audio, simply press LANG on remote control repeatedly.
Slow motion playback
This feature lets you slow down playback.
1. Press Slow on the remote control during playback,
or press
on the head unit, then long press
to enter the slow selection mode.
2. Pressing it repeatedly will switch you to the following steps: 1/2 - 1/3 - 1/4 - 1/5 - 1/6 - 1/7.
Note:
• To resume normal playback, press
on head unit or
on remote control.
• There is no sound during slow motion playback.
• With some disc, slow motion may be unclear during slow motion playback.
Step playback mode
This feature lets you show step by step to playback.
1. Press
on the head unit, and then press
to step by step to playback.
2. To resume normal playback, press
on head unit or
on remote control.
Fast rearward/ forward
1. Press and hold
(rearward) or
(forward) button
2. Short press
or
button and the speed of the search will increase by x2, x4, x8, and x20.
3. To resume normal playback at desired point, press
on head unit or
on remote control.
Selecting Play Mode
Refer to CD/MP3 chapter.
Zooming in during playback
You can zoom in into the picture during playback.
1. Press ZOOM on the remote control during playback.
2. Every time you press this button, the unit will zoom 2, 3, 4, 1/2, 1/3, 1/4 times and OFF.
Displaying information
During playback, you can see the VCD disc play information.
1. Press DISP on head unit or DISPLAY on the remote control once. Unit will display the play
time and the disc elapse time.
2. Press it twice and the track number together with total tracks information will be displayed.
To Next Page
Loading...