2. Enter the track number besides the memory location. Up to 16 tracks can be stored.
3. When all tracks have been programmed, select PLAY and press ENTER. Program playback
will start.
4. Press
button to exit program playback.
LISTENING TO USB MUSIC
This unit supports playback of music files stored in a USB memory stick.
Plug the USB stick in the designated port. Press the SRC button to choose the USB mode then
playback starts.
PLAYING DVD VIDEO
Basic operation of DVD Video
1. Insert a DVD disc. Press the SRC button to choose the DISK mode then unit automatically
loads the disc. When the DVD offers a menu, the menu is displayed.
2. Use the remote control navigation buttons to choose desired features displayed on the menu.
Press ENTER to select.
3. To perform fast rearward or forward, press and hold or. Once in faster mode each time the
keys or are pressed and held the speed is increased. To resume normal playback at a
desired point, press
on head unit or
on remote control.
4. To skip back or forward to another chapter, pressor.
5. To pause playback, press
on head unit, press
button again to resume or press
to pause
on remote control. Press it again to resume.
6. To stop playback, press
. When you stop DVD playback, that location on the disc is
memorized enabling playback from that point when you play the disc again. To resume
playback, press
on head unit or
on remote control
Specifying Title/Chapter
Press NUMBER corresponding to a desired title/chapter number during playback. The number is
displayed and playback starts from the selected title.
• To select 3, press0, 3.
• To select 13, press 1, 3.
• To select 23, press 2, 3.
Changing audio language during playback (Multi-audio)
DVDs can provide audio playback with different languages and different systems. With DVDs
featuring multi-audio recordings, you can switch between languages/audio systems during
playback.
To choose different audio, simply press LANG on remote control repeatedly.
Note:
• With some DVDs, switching between languages/audio systems may only be possible using a
menu display.
• You can also switch between languages/audio systems using SETUP MENU.
Changing the subtitle language during playback (Multi-subtitle)
With DVDs featuring multi-subtitle recordings, you can switch between subtitle languages during
playback.
Press SUB TITLE on the remote control during playback. Press repeatedly until the supported
desired subtitle appears.
Note:
• With some DVDs, switching between subtitles may only be possible using a menu display.
• You can also switch between subtitles using SETUP MENU.
Slow motion playback
This feature lets you slow down playback.
1. Press Slow on the remote control during playback or press
on the head unit, then long
To Next Page
Loading...