ActionTec GT784WN User Manual

1-888-850-5915
Technical Support
1
128429/7-12/7670
General Information
Router Kit Components
Your router kit should include the following:
• Actiontec GT784WN modem/router
• Power cord
• Ethernet cable
• Phone cord
• DSL filters
Note: In order to connect the router to your computer, your computer must have an Ethernet Network
Interface (NIC) installed.
Powercycling
If you’re experiencing trouble getting an Internet connection, complete the following steps:
1. Turn off the Actiontec GT784WN router.
2. Shut down your computer.
3. Wait 60 seconds.
4. Turn on the Actiontec GT784WN router.
5. Wait 1–3 minutes for all lights to stop flashing on the router.
6. Turn on your computer.
7. If your problem is not resolved, please contact our Technical Support team.
Verify Computer Settings
To communicate with your router, your computer must first be set up to receive a DHCP address
from the router.
Actiontec GT784WN Router
Setup and User Guide

ActionTec GT784WN Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
RJ-11 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Routing protocols	IP
Antennas quantity	1
Product color	Black

Weight and Dimensions

Weight	- g