Name: ActionTec GT784WN
Brand: ActionTec
Rating: 4 (1 reviews)

To Next Page

To Previous Page

1-888-850-5915

Technical Support

128429/7-12/7670

To verify connection conﬁgurations:

Windows 7 and Windows Vista:

1. Select the Start Circle, then in the Start Search ﬁeld, type “ncpa.cpl”.

2. Right-click Local Area Connection and click Properties.

3. Highlight (do not uncheck) Internet Protocol TCP/IP Version 4.

4. From the dropdown list, select Properties.

5. Make sure to Obtain IP Address Automatically and Obtain DNS Server Addresses Automatically are

selected, and then click OK.

6. Click Close.

Windows XP:

1. Select Start, then Run.

2. Type “ncpa.cpl” in the Run box.

3. Right-click Local Area Connection, then select Properties.

4. Highlight (do not uncheck) Internet Protocol TCP/IP.

5. Select Properties.

6. Make certain Obtain IP Address Automatically and Obtain DNS Server Addresses Automatically

are selected, and then click OK.

7. Click Close.

Mac OS X:

1. Select the Apple menu, then select System Preferences.

2. Select Network.

3. On the Show dropdown box, select Built-In Ethernet.

4. On the TCP/IP tab, make sure the Conﬁgure IPv4 dropdown menu is set to Using DHCP.

5. Click Close.

6. When asked if you want to apply conﬁguration changes, select Apply.

Mac OS 8/9:

1. Select the Apple menu, then select Control Panels, and select TCP/IP.

2. On the Connect via dropdown menu, select Ethernet.

3. On the Conﬁgure dropdown menu, select Using DHCP Server.

4. Click Close.

5. When asked if you want to save changes to the conﬁguration, select Save.

Actiontec GT784WN Router

Setup and User Guide

Other manuals for ActionTec GT784WN

Questions and Answers:

Need help?

Do you have a question about the ActionTec GT784WN and is the answer not in the manual?

General