Need help?Do you have a question about the ActionTec RTL8812AU-CG and is the answer not in the manual?
General| Interface | USB 3.0 |
|---|---|
| Model | RTL8812AU-CG |
| Brand | Actiontec |
| Chipset | RTL8812AU |
| Wireless Standards | IEEE 802.11ac, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Frequency Band | 2.4 GHz, 5 GHz |
| Maximum Data Rate | 867 Mbps |
| Operating Systems Supported | Windows |
Details FCC compliance rules and user guidance to prevent interference.
Specifies conditions for OEM integrators regarding antenna and transmitter co-location.
Guidelines for end product manual content and visible labeling requirements.
Covers compliance with RSS-210 and antenna gain limits.
Equipment complies with IC limits for uncontrolled environments, 20cm separation required.
Notes on indoor use for 5150-5250 MHz and antenna gain for 5725-5825 MHz.
Limits operation channels and prohibits supplying tools for domain change.
Device may stop transmission; OEM responsible for re-evaluation if conditions not met.
Specifies required labeling for the final product, including IC identifier.
OEM integrators must not provide installation/removal info; user manual must include warnings.
Introduces the RTL8812AU-CG as a Miracast sink device with BTLE.
Shows the module's catalog numbers and its connector pin.
Host device needs a compatible PIN-to-PIN connector and an HD display.
Lists compatible devices like smartphones, tablets, and notebooks with specific OS.
Steps to connect the module, power on, and verify display output.
Step-by-step guide to connect a Windows 10 device using Miracast.
Instructions for connecting an Android device using Miracast.
Explains proximity connect feature using BTLE for auto reconnect.
Details the three display modes: Duplicate, Extend, and Second Screen Only.
To Next Page