To Next PageTo Next Page
Need help?Do you have a question about the ActionTec ScreenBeam Mini2 and is the answer not in the manual?
General| HDCP | Yes |
|---|---|
| Type | AV receiver |
| Antenna type | 2x2 internal |
| Audio system | stereo |
| Certification | FCC, UL |
| Product color | Black |
| Maximum resolution | 1920 x 1080 pixels |
| Security algorithms | 128-bit AES, WPA2, WPS-PIN |
| Networking standards | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Audio output channels | 2.0 channels |
| Supported video modes | 1080p |
| Audio formats supported | LPCM |
| Video compression formats | H.264 |
| Connector type | HDMI A |
| Number of connectors | 1 |
| Input current | 1 A |
| Operating voltage | 5 V |
| Power consumption (typical) | 4 W |
Weight and Dimensions| Weight | 39.689 g |
|---|---|
| Dimensions (WxDxH) | 29.972 x 98.044 x 11.938 mm |
Connect the ScreenBeam Mini2 Continuum Edition to your display's HDMI input.
Connect the USB cable to the power adapter and the ScreenBeam receiver.
Switch display input to HDMI until the "Ready to Connect" screen appears.
Visit actiontec.com/setupsb via browser for connection steps.
Troubleshoot common issues like no display or receiver rebooting with setup tips.
Learn to upgrade firmware, adjust settings, and customize receiver options.
Resolve poor video quality, skipped, or frozen frames due to weak wireless signals.
Fix missing Desktop/Tablet mode switching notification on Windows 10 devices.
