ScreenBeam
™
|
960
ScreenBeam 960
Wireless Display Receiver
Quick Start Guide
This Quick Start Guide provides the instructions on how to install ScreenBeam 960
receiver, connect client devices, and setup for deployment. Refer to the support
website for the full deployment guide, latest updates, and best practices.
Before Beginning Deployment
Before deploying Actiontec ScreenBeam products, check for the latest firmware,
release documentation and tech tips.
z For ScreenBeam receiver’s deployment guide, firmware upgrades, and release
notes, go to: https://support.screenbeam.com/960
z For Miracast
™
or native macOS/iOS wireless display connection tutorial, go to:
https://www.screenbeam.com/setup
z For ScreenBeam Central Management System (CMS) software, go to:
https://support.screenbeam.com/cms
z For Open Source information, go to: https://opensource.actiontec.com
Package Contents
z ScreenBeam 960 receiver
z Power supply
z HDMI cable
z Quick Start Guide (this document)
z Regulatory documents
Documentation
For FAQs, troubleshooting tips
and support, visit:
https://support.screenbeam.com
Need Help?
To open a ticket for support, visit:
https://support.screenbeam.com/ticket
1 | screenbeam.com
quick start guide
To Next Page
Need help?
General
