ActionTec T3280B User Manual

6
Introduction
Getting to Know the Gateway
This section contains a quick description of the Gateway’s lights, ports, and other
features. The Gateway has several indicator lights (LEDs) and a button on its front
panel, and a series of ports and switches on its rear panel.
Front Panel
The front panel of the Gateway features 12 LEDs, and a WPS (Wireless Protected
Setup) button.
Power
The Power LED brights green when the unit is powered up.
DSL 1
The DSL 1 LED brights green when the DSL 1 is synchronized.
DSL 2
The DSL 2 LED brights green when the DSL 2 is synchronized.
Internet
The Internet LED illuminates green when the Gateway is properly connected to
a WAN Internet connection.WAN/LANThis LED brights green when there is
an active Ethernet cable connected to the WAN port, and it blinks with traffic
activity.
Ethernet 1
This LED brights green when there is an active Ethernet cable connected to the
LAN port #1, and it blinks with traffic activity.
Ethernet 2
This LED brights green when there is an active Ethernet cable connected to the
LAN port #2, and it blinks with traffic activity.
Ethernet 3
This LED brights green when there is an active Ethernet cable connected to the
LAN port #3, and it blinks with traffic activity.
Ethernet 4
This LED brights green when there is an active Ethernet cable connected to the
LAN port #4, and it blinks with traffic activity.

ActionTec T3280B Specifications

General

Brand	ActionTec
Model	T3280B
Category	Network Router
Language	English