Introduction
Attention: If you received a WCB6200Q from your service
provider, contact them to receive the proper user manual for !
this device.
e Actiontec WCB6200Q is a wireless network extender with dual
concurrent radios supporting both 2.4GHz and 5GHz operation in
802.11 a/b/g/n, and also 5GHz in 802.11ac. is allows the Extender to
connect to everything from legacy wireless laptops, computers, and
gaming platforms, up to the most current (and future) Apple and
Android tablets, laptops, media platforms, and smartphones.
e Extender works by being placed in a central location of the home, or
in a location where the existing wireless signal is weak, and then being
physically connected directly to your gateway/modem. is physical
connection extends the Wi-Fi signal.
If you would like to use the same Wi-Fi Network Name and Password as
your Wi-Fi Router, you can sync them using the
WPS buttons on the Router and the Extender.
As a result, the Wireless Network Extender will
take your router’s current Wi-Fi network name
and add “-Ext” for the 2.4 GHz frequency and !
“-Ext-5G” for the 5 GHz frequency. e Wi-Fi
password for both the 2.4 GHz and 5 GHz Wi-Fi
extender networks will be the same as your
existing Wi-Fi router.
For users with newer mobile devices, tablets, and
laptops, connections through the 5GHz radio can
markedly increase the performance and speed of
your Wi-Fi connection, while freeing up the
2.4GHz band for legacy or older devices.
To Next Page
Loading...
Need help?
General
