Active Aqua AACH10 User Manual

ActiveAquaChiller
Specifications:

Model:
Watts:
BTU:
Amps:
Volts:
CordLength:
Compatibility:
AACH10/AACH25/AACH50/AACH100
150W/280W/360W/950W
960/2300/4100/10370
2.2/3/4.4/9.6
110‐120V
6'
ActiveAquasubmersiblewaterpumps
Parts:
Chillerunit x1 ea.
Inflow/outflowfittingkit: x1 ea.
a. Inlet/outletfittings x2 ea.
b. Wormdrivehoseclamps x2 ea.
c. Rubberreplacementcollars(extras) x2 ea.
d. Replacementfuse x1 ea.
AssemblyInstructions:
1. Removethechillerunitand
allofthecontainedhardwarefromtheboxandpacking
material.
2. Setthechillerunit upri ghti nthedesiredareaonastablesurfa ceensuringthereisat
least1'ofclearancearoundthebody(sides,top,andback)oftheunit.
3. Installtheinlet/outletfittingsontotheinflowandoutflowthreadedsites.
Active Aqua Chiller Setup and Troubleshooting
Guide Summary

Active Aqua AACH10 Specifications

General

Model	AACH10
Category	Chiller
Cooling Capacity	1/10 HP
Voltage	115V
Frequency	60Hz
Tubing Size	1/2"

Summary

Active Aqua Chiller Overview

Specifications

Details model, power, BTU, amps, voltage, cord length, and compatibility.

Parts List

Lists included chiller unit, fittings, hose clamps, collars, and replacement fuse.

Assembly Instructions

Steps for unboxing, positioning, and connecting fittings to the chiller unit.

Chiller Operation

Initial Setup and Connection

Submerging the water pump, ensuring water flow, and connecting the chiller.

Setting and Adjusting Temperature

Entering programming mode and using buttons to set desired water temperature.

Temperature Display Modes

Explains how to view current set temperature and actual water temperature.

Temperature Error Adjustment

Procedure to enter error adjustment programming and modify temperature range.

Maintenance and Troubleshooting

Fuse Replacement Procedure

Steps to detach power cord, remove, check, and replace the fuse.

Compressor Operation and Error Codes

Details compressor behavior, indicator lights, and interpreting error messages.

Cleaning and Maintenance Schedule

Recommendations for flushing internal components and preventing clogging.

Usage Guidelines and Warnings

Special Notes and Instructions

Guidance on cooling efficiency, pump selection, power, and remote operation.

General Safety Warnings

Critical warnings regarding covering, liquids, power cord, environment, and submersion.

The Hydrofarm Guarantee

Warranty Information and Claims

Details the 1-year warranty, exclusions, and claim process.