Active 2.6 L - User Manual

MOD. 2.6 - L / B / EVOLUTION
MOD. 3.0 - L / B
MOD. 3.4 - EVOLUTION / VIPER
MANUALE D’ISTRUZIONE
MANUEL D’INSTRUCTION
F
I
GB
OWNER’S MANUAL
D
GEBRAUCHSANWEISUNG
MANUAL DE INSTRUCCIONES
P
MANUAL DE INSTRUÇÕES
E
NL
INSTRUCTIEHANDLEIDING
BRUKSANVISNING
S
NAVODILO ZA UPORABO
SLO
RUS
 

Active 2.6 L Specifications

General

Brand	Active
Model	2.6 L
Category	Brush Cutter
Language	English

Summary

INTRODUCTION

SYMBOL INTERPRETATION

DESCRIPTION

SPECIFICATIONS AND DECLARATION OF CONFORMITY

ASSEMBLY

ENGINE;TRANSMISSION ASSEMBLY

Connect the engine to the transmission and secure the drive shaft and tube.

BLADE ASSEMBLY

Fit the blade, flanges, and cup securely, ensuring correct rotation direction.

NYLON HEAD ASSEMBLY

Mount the nylon head with the upper flange and tighten clockwise by hand.

FITTING THE EXTENSION

Attach extension tube to coupling, aligning reference marks and securing with lever.

USE OF BRUSHCUTTER

STARTING

Prime bulb, set choke, pull starter until engine runs, then release throttle to idle.

STOPPING ENGINE

Move throttle to idle, wait for engine to cool, then turn ignition switch to stop.

PREPARING FOR USE

FUELING

Safely refuel the engine with the correct fuel-oil mixture, away from heat sources.

STARTING

Follow steps to prime, set choke, and pull starter for engine ignition.

REGULAR MAINTENANCE

IN AIR FILTER SPONGE

Clean air filter sponge with gasoline/oil mix, wring out, and reassemble.

SPARK PLUG

Remove, clean, and check spark plug gap; replace spark plug every 100 hours.

STORAGE

WARRANTY CERTIFICATE