9
OZONE PLATE
Carefully remove the plates (a & b) from the card cage
by grasping the middle of the edge nearest to you and
slowly pulling straight out.
MAINTENANCE CONTINUED
PLATE CARD CAGE
Also be sure to clean the stand-os at the corners
of the ozone plate card cage. (A cotton swab with
alcohol works well.)
FAN BLADE AND FRONT GRILL
Wipe o fan blade and front grill if dirty with damp
washcloth. The fan requires no maintenance (with
the exception of the rst time it is used, when it
may be necessary to give it a gentle push to get it
started). If the fan squeaks, a drop of lightweight
oil may be needed on the fan shaft.
For all applications - Clean with 50% ammonia and 50%
water to remove contaminates. Put the plate(s) into a
shallow dish and pour enough mixture into the dish to
just cover plate(s). Allow the plate(s) to soak for 10-20
minutes. Remove and scrub with a soft bristle brush. Rinse
thoroughly. Let air dry for 24 hours or use a blow dryer to
dry thoroughly.
If you are in an environment where there are fats, oils, or grease, such as in a kitchen, start
cleaning with denatured alcohol and a soft bristle brush. This will cut the grease without
leaving a residue.
To Next Page
Loading...
