11
Extended features for chain drives - Type HOC
compatible with Actulux series HCM and HCV
EXTENDED FEATURES FOR CHAIN DRIVES
HOC is an advanced electronic product, which is used to
add features in new, but also already installed chain drives
(contact Actulux sales department for further information)
● Open / Close indication (bistable relays)
● Building Management System (BMS) 0-10V control
● Interface for MAYSER Safety Edge (true Anti-Pinch)
HOC is compatible with 3. generation of Actulux chain drives.
FEATURES
Power Supply: 24-36-48VDC +/- 15% Max. Ripple: 2 Volt PP
Max. power in the position relay: 30VDC / 2A
Dimensions (L x W x D): 86 x 86 x 39 mm
Colour: White / Density: IP65
Meets requirements: EN12101-2 / EN60335-1 / EN50130-4 / Marking: CE
Product number: 390420 (Standard) / 390421 (BMS 0-10V control)
INPUT = STROKE LENGTH INDICATION FOR OPEN / CLOSE
EXTERNAL CONTROL
0 - 10V = 0% - 100% (stroke length)
--------------------------------------------------
Min. 10% interval
Status Status
CLOSED +15mm NOT CLOSED
Status Status
OPEN -15mm NOT OPEN
-15 mm inwards 100% +15 mm outwards 0%
Not Open Open
Not Open or Closed
Not Closed
Closed
NO CO NC NO CO NC NC CO NO NC CO NO
16 15 14 16 15 14 13 12 11 13 12 11
To Next Page