6
Wind & Rain Sensor, type AR/AWR 24/250
automatic control of smoke, re & comfort ventilation systems
INTELLIGENT AND ADVANCED PRODUCT
Wind and Rain Sensor #111961 consists of a wind wheel
and a rain sensor surface. It is developed for automatic
control of smoke and comfort ventilation system.
Rain Sensor #111960 consists a rain sensor surface.
Both sensors are equipped with a potential free relay with
a contact rating of 250VAC / 8A or 24VDC / 8A.
In case of wind and / or rain the relay is activated. The
settings for the wind trigger point is adjusted using rotary
switch on the main PCB.
WIRELESS CONNECTION
It is possible to connect Actulux Weather Sensor
wireless to Actulux SV/SVM Control Panel or to
Actulux Flex1 ACDC using a RF-transmitter #111892 tted
into the sensor.
Range: Line of sight approx. 400 meters.
Actulux Control Panels have to be equipped with
RF-receiver PCB:
#111894 for SVM Control Panels
#111895 for SV Control Panels
FEATURES
Power supply: 18V til 35VAC / 20V til 35VDC / 200V til 250VAC
Output contact: NO-NC 1 x
potential free change-over contact
Contact rating: 250VAC / 8A or 24VDC / 8A
Dimensions: 80 x 160 x 55 mm (WxHxD / without wind wheel)
Weight: Approx. 0,7 kg
Protection class: IP65
Setting of the wind mode: Approx. 1 til 9 m / s ( 20%)
CE-marking: in accordance with the EMC-directive and low voltage directive
Connecting the controller has to be carried out by professionals
The sensor must be cleaned regularly, depending on soil degree, with a wet cloth with water - no abrasive
RF-Transmitter #111892 (optional)
Brackets for roof mounting #99600024
Brackets for wall mounting #99600025
#111961
#111960
+
-
To Next Page
Loading...