To Next PageTo Next PageWhat to do if ACU-RITE Atomic Clock will not synchronize?
If your ACU-RITE Alarm Clock isn't synchronizing, here are a couple of things you can try: 1. Insert a fresh 1.5 volt “AA” battery. 2. On a clear night, take the clock outside, remove the battery, and then reinsert it to power it up.
How to improve poor signal on ACU-RITE Atomic Clock?
To improve the signal reception on your ACU-RITE Alarm Clock, try the following: * Place the clock near a window, ensuring that curtains or blinds are open. * Keep the clock more than 3 feet away from electronics or wiring to reduce interference. * If the signal isn't good on your first try, attempt again later. * Be aware that, occasionally, the atomic signal WWVB transmitter may be turned off for maintenance.
General| Power Source | Battery |
|---|---|
| Alarm Function | Yes |
| Calendar Display | Yes |
| Temperature Display | Yes |
| Display Type | LCD |
| Radio Controlled | Yes |
| Snooze Function | Yes |
| Time Format | 12/24 Hour |
| Indoor Temperature Display | Yes |
| Date Display | Yes |
| Backlight | Yes |
| Batteries Required | 2 AA |
| Time Signal | Atomic |
| Alarm | Yes |
Choose a location not exposed to direct sunlight or other heat sources for accurate temperature readings.
Instructions on how to set the time using the knob on the back of the clock movement.
Details on inserting the required 'AA' battery to power the clock.
Guide for adjusting the thermometer pointer if it reads inaccurately due to shipping.
Details the warranty terms, remedy, and disclaimers for the product.
Explains the device's compliance with FCC rules and potential interference.
Labels key components of the atomic clock for user reference.
Explains how atomic clocks synchronize to NIST radio signals for accuracy.
Guide to setting time zone, daylight saving time, and choosing a clock location.
Describes the process of the clock setting itself after receiving the atomic signal.
Instructions for manually setting the clock time without an atomic signal.
Advice on cleaning, battery replacement, and storing the clock.
Guidance on securely mounting the clock on a wall.
Tips for using the clock outdoors, including battery performance in cold temperatures.
Solutions for problems related to weak or absent atomic signal reception.
Steps to take if the clock fails to synchronize with the atomic signal.
Procedures to correct inaccurate time readings by forcing signal search.
How to restart the setup process if the clock does not receive the atomic signal.
Information on registering the product for warranty service and accessing support.
