Fill the reserve tank to the MAX
mark. Install the reserve tank cap.
Install the radiator cap, and
tighten it to the first stop.
Start the engine and let it run until
the radiator cooling fan comes on
at least twice. Then stop the
engine.
Remove the radiator cap. Fill the
radiator with coolant up to the
base of the filler neck.
Install the radiator cap, and
tighten it fully.
Pour Honda All Season
Antifreeze/Coolant Type 2 into
the radiator up to the base of the
filler neck. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
The cooling system capacity is:
10.
11.
12.
13.
9.
8.
Cooling System
Maintenance
269
FFIILLLLEERR NNEECCKK
FFiillll uupp ttoo hheerree
2.01 US gal (7.6 , 1.67 Imp gal)
01/09/07 12:38:21 31S3V610_274
To Next Page
Loading...
Need help?
General
