CONTINUED
Pour Honda All Season
Antifreeze/Coolant Type 2 into
the radiator up to the base of the
filler neck. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
Loosen the drain plug on the
bottom of the radiator. Drain the
coolant into an appropriate
container.
When the coolant stops draining,
tightenthedrainplugatthe
bottom of the radiator.
Removetheclip,thenremovethe
reserve tank drain cap. Drain the
coolant into an appropriate
container.
Install the reserve tank drain cap
and clip.
5. 6.
7.
8.
Cooling System
Maintenance
215
DRAIN PLUG
CLIP
DRAIN
CAP
Fill up to here
FILLER NECK
To Next Page
Loading...
Need help?
General
