Acura 2003 RSX - Controls Near the Steering Wheel

Your dealer will reset this indicator
after completing the scheduled
maintenance. If this maintenance is
done by someone other than your
Acura dealer, reset the indicator as
follows.
Turn off the engine.
Press and hold the select/reset
button in the instrument panel,
then turn the ignition switch ON
(II).
Hold the button until the indicator
resets (approximately ten
seconds).
This indicator lights when the
security system is set. See page
for complete information on the
security system.
1.
2.
3.
148
Indicator Lights
Instruments and Controls
Security System Indicator
65
SELECT/RESET BUTTON
SECURITY SYSTEM INDICATOR