Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Testthelightstomakesurethe
new bulb is working.
Install the power steering
reservoir on the bracket.
Open the hood.
(Passenger’s side)
Remove the power steering
reservoir from the bracket.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
1.
2.
3.
4.
5.
6.
7. (Passenger’s side)
Lights
Maintenance
Replacing a Front Turn Signal
Light Bulb
246
Passenger’s side
POWER STEERING RESERVOIR
BULB
To Next Page
Loading...
