Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
Testthelightstomakesurethe
new bulb is working.
Reinstall the high-mount brake
light cover.
Insert a flat-tipped screwdriver
between the left edge of the lens
and the housing. The lens will
come down.
Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
Testthelightstomakesurethe
new bulb is working.
Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.
4.
5.
6.
7.
1. 2.
3.
4.
Lights
Maintenance
Replacing a Rear License Plate
Bulb
248
BULB
To Next Page
Loading...
