Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
Lower the car to the ground and
remove the jack.
13. 14. 15.
Taking Care of the Unexpected
Changing a Flat Tire
266
(Except Type-S)
80 lbf·ft (108 N·m , 11 kgf·m)
To Next Page
Loading...
Need help?
General
