Follow the child seat maker’s
instructions for any additional
advice on adjusting or tightening
the fit.
Attach the attaching clip to the
tether anchor fitting and tighten
the strap according to the child
seat maker’s instructions. Make
sure the strap is not twisted.
Push and pull the child seat
forward and from side to side to
verify that it is secure enough to
stay upright during normal driving
maneuvers.
This symbol on rear or forward
facing child seats or booster
cushions indicates the presence of
LATCH compatible hardware.
4. 5.
6.
Protecting Children
Driver and Passenger Safety
Lower Universal Anchorage
System Symbol
43
Flexible type
To Next Page
Loading...
Need help?
General
