Acura 2004 MDX User Manual

Push the electrical connector onto
the new bulb.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Turn on the headlights to test the
new bulb.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
To remove a bulb, pull it straight
out of its socket.
Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
1.
2.
4.
5.
6.
2.
3.
CONTINUED
Lights
Maintenance
Replacing Front Turn Signal/
Parking and Side Marker Light
Bulbs
215
TAB
BULB
CONNECTOR

Acura 2004 MDX Specifications

General

Brand	Acura
Model	2004 MDX
Category	Automobile
Language	English