Install the new bulb into the
socket.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Testthelightstomakesurethe
new bulb is working.
Open the tailgate. Use a
screwdriver protected with a cloth
to pry open the two covers.
Remove the two screws and
remove the rear light assembly
from the rear pillar.
Determine which of the four bulbs
is burned out: brake/taillight, turn
signal/hazard lights, side marker
light, or back-up light.
Remove the socket by turning it
one-quarter turn counterclockwise.
Remove the burned-out bulb by
pulling it straight out of the socket.
1.
2.
3.
4.
5.
3.
4.
5.
Replacing Rear Bulbs
Lights
Maintenance
216
To Next Page
Loading...
Need help?
General
