Removethelensbycarefully
prying on the edge of the lens in
the middle with a fingernail file or
a small flat-tip screwdriver. Do not
pry on the edge of the housing
around the lens.
Remove the bulb by pulling it
straight out of its metal tabs.
Push the new bulb into the metal
tabs. Snap the lens back in place.
Push the new bulb into the metal
tabs. Snap the lens back in place.
Remove the bulb by pulling it
straight out of its metal tabs.
1.
2.
3.
2.
3.
Replacing the Trunk Light Bulb
Maintenance
Lights
296
VANITY MIRROR LIGHT
TRUNK
To Next Page
Loading...
