Clean off any dirt and oil that have
collected around the ignition coils.
Remove the two bolts and the four
nuts with a wrench and remove
the tower bar. Then remove the
A/C tube from the three clips.
Remove the two bolts and the
three nuts with a 7/16 inch (10
mm) wrench, then remove the
engine cover.
The spark plugs in your car are a
special platinum-tipped design for
longer life. The spark plugs should
be replaced according to the time
and distance recommendations in
the maintenance schedule.
1. 2.
3.
CONTINUED
Replacement
Spark Plugs
Maintenance
269
NUTS
BOLTS
NUTS BOLTS
NUTS