▲
▼
▲▼
−
−
▲▼
CONTINUED
Here is one custom setting for the
wiper setup:
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
You can select from these two
settings when the wiper switch is in
the INT (intermittent) position:
INTERMITTENT The
intermittent operation varies
according to the selection you make
on the wiper lever’s intermittent
control ring.
WITH VEH SPD The intermittent
operation varies according to vehicle
speed.
While ‘‘WIPER SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
WIPER ACTION
Wiper Action
Multi-Information Display
Wiper Setup
Instruments and Controls
113
INFO ( / )
BUTTON
SEL/RESET
BUTTON
０７／０７／０９ ０９：３６：４６ ３１ＳＴＸ６１０ ０１１８
To Next Page
Loading...
