The power tailgate has an auto-
reverse feature. If it meets
resistance while opening or closing,
it will beep three times and reverse
direction. However, the tailgate may
not reverse immediately. Always
make sure passengers and objects
are clear of the tailgate before
opening or closing it.
Also check that passengers,
especially children, do not have their
hands on the edge of the tailgate or
on the tailgate sill. The auto reverse
featurestopsworkingwhenthe
tailgate is about to latch so the motor
can pull the tailgate shut.
If your vehicle’s battery is
disconnected, goes dead, or the fuse
is removed while the tailgate is fully
open, the power tailgate needs to be
reset. After connecting the battery
or installing the fuse, close the
tailgate fully by hand.
The power tailgate may not open or
close under the these conditions:
Whenthetailgateortheroofis
covered with snow or ice.
Do not install any accessories on the
tailgate. It may cause the tailgate not
to function properly. If there is snow
or ice on the tailgate, make sure to
remove it before you operate the
tailgate.
The tailgate has sensors on both
sides. Be careful not to damage them.
If the sensors are damaged, the
power tailgate does not function
properly.
When the vehicle is swayed in a
strong wind.
The vehicle is parked on a steep
hill.
If you push the tailgate release
button inside the handle while the
tailgate is opening or closing, it will
stop moving. You need to open or
close it the rest of the way manually.
CONTINUED
Auto-Reverse
Tailgate
Instruments and Controls
133
Closing a power tailgate while
anyone is in the path of the
tailgate can cause serious
injury.
Make sure everyone is clear
before closing the power
tailgate.
０７／０７／０９ ０９：３９：２２ ３１ＳＴＸ６１０ ０１３８
To Next Page
Loading...
Need help?
General
