−− −To adjust bass
and treble, select BASS or TREBLE,
andpressENTERontheinterface
selector. The current setting is
shownonthedisplay.Turnthe
interface knob to the desired level,
and enter your selection by pressing
ENTER on the interface selector.
These
modes adjust the strength of the
sound coming from each speaker.
Fader adjusts the front-to-back
strength, while balance adjusts the
side-to-side strength. To adjust fader
and balance, select FADER or
BALANCE, then press ENTER on
the interface selector. The current
setting is shown on the screen. Turn
the interface knob to the desired
level, and enter your selection by
pressing ENTER on the interface
selector. To equalize the fader or
balance, turn the interface knob until
the marks on the sound grid come to
the center of the adjustment bar.
To
adjust the strength of the sound
from the center or subwoofer
speaker, select it and press ENTER
on the interface selector. Turn the
interface knob to the desired level,
and enter your selection by pressing
ENTER on the interface selector.
Playing the AM/FM Radio (Models with navigation system)
BASS/TREBLE FADER/BALANCE CENTER/SUBWOOFER
208
０７／０７／０９ ０９：４９：４９ ３１ＳＴＸ６１０ ０２１３
To Next Page
Loading...
Need help?
General
