To remove a different disc from the
changer,firstselectitbypressing
the corresponding number on the
preset button or turning the
interface knob, and pressing ENTER
on the interface selector. When that
disc begins playing, press the eject
button.
When you press the eject button
while listening to the radio, or with
the audio system turned off, the disc
that was last selected is ejected.
After that disc is ejected, pressing
the eject button again will eject the
next disc in numerical order. By
doing this six times, you can remove
all the discs from the changer.
To remove the disc that is currently
playing, press the eject button. You
will see ‘‘EJECT’’ in the audio display.
When you remove the disc from the
slot, the system automatically enters
the previous mode AM, FM1, FM2,
or XM Satellite Radio. The system
also begins the load sequence so you
can load another disc. If you do not
load another disc, the load sequence
is canceled, and the system
continues playing in the previous
mode.
If you do not remove the disc from
the slot, the system will reload the
disc after 10 seconds. To begin
playing the disc, press the disc
button.
To eject all discs, press and hold the
eject button.
You can also eject discs when the
ignition switch is off:
To eject one disc, press and release
the eject button.
Removing Discs from the
Changer
Playing Discs (Models with navigation system)
Features
227
０７／０７／０９ ０９：５２：２８ ３１ＳＴＸ６１０ ０２３２
To Next Page
Loading...
Need help?
General
