Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
Remove the wheel nuts, then
remove the flat tire.
Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully;itmaybehotfrom
driving.
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
restinginthejacknotch.
12. 13.
14.
15.
Changing a Flat Tire
428
EXTENSION
BRAKE HUB
WHEEL NUT WRENCHJACKING POINT
０７／０７／０９ １０：２０：１９ ３１ＳＴＸ６１０ ０４３３
To Next Page
Loading...
Need help?
General
