▲▼
▲
▼
While the multi-information display
is in the DOOR/WINDOW SETUP
screen of the CUSTOMIZE GROUP,
press the SEL/RESET button. The
screen changes to CUSTOMIZE
MENU. Press the INFO ( / )
button until you see above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select DRIVER DOOR or ALL
DOORS by pressing the INFO ( /
) button, then press the SEL/
RESET button to enter your
selection.
To select whether the driver’s door
unlocks or all the doors unlock when
you unlock the doors with the
remote, follow these instructions.
CONTINUED
Door Lock Mode
Multi-Information Display
Instruments and Controls
127
０７／０５／１７ ０９：００：４８ ３１ＳＪＡ６３０ ０１３２
To Next Page
Loading...
