Screw the towing hook into the
hole, and tighten it with the wheel
nut wrench.
Remove the towing hook and
wheel nut wrench from the tool
case in the spare tire.
The cover is attached to the bumper
with a tether.
2.
3.
If Your Vehicle Gets Stuck
460
WHEEL NUT WRENCH
COVER
TETHER
To avoid damage to your vehicle, use
the towing hook for straight, f lat
ground towing only. Do not tow at an
angle. The tow hook should not be used
to tow the vehicle onto a f lat bed. Do
not use it as a tie down.
０７／０５／１７ ０９：５９：３３ ３１ＳＪＡ６３０ ０４６５
To Next Page
Loading...
