If this procedure is not necessary the
system proceeds directly to the
(see page ).
During initialization, the system
searches for all available GPS
satellites, and obtains their orbital
information. During this procedure
the vehicle should be out in the open
with a clear view of the sky.
Depending on the length of time the
battery was disconnected, your
system may require GPS
initialization. If it does, the above
screen appears. Follow the
instructions on the screen.
Follow the instructions in the audio
system section to enter the 5-digit
audiocode(seepage ).The
system voice will not operate if the
audio code is not entered
241 247Compass screen
GPS initialization
Compass System (U.S. model without navigation system)
260
０７／０５／１７ ０９：２４：２７ ３１ＳＪＡ６３０ ０２６５
To Next Page
Loading...
Need help?
General
