CONTINUED
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it one-
quarter turn counterclockwise.
Remove the left or right side
engine compartment cover from
thesideyouareworkingonby
carefully pulling the cover out (see
page ).
Ifyouarereplacingthebulbon
the driver’s side, remove the
battery cover (see page ), then
remove the battery hold-down by
removing the two nuts with a 10
mm wrench. Then carefully slide
the battery toward the engine to
access the bulb.
2.
3.
1.
398
428
Lights
Maintenance
409
NUTS
BULB
BATTERY HOLD-DOWN
CONNECTOR
０７／０５／１７ ０９：５０：４７ ３１ＳＪＡ６３０ ０４１４
To Next Page
Loading...
