Elapsed Time Reset
There are four elapsed time reset
choices you can make:
MANUAL ONLY － You can reset
the elapsed time, when Trip
Computer's Elapsed Time is
displayed (see page 85).
IGN OFF － The elapsed time is
reset when you turn the ignition
switch to the LOCK (0) position.
TRIP A － The elapsed time is reset
when the Trip A is reset.
TRIP B － The elapsed time is reset
when the Trip B is reset.
You can choose this customizable
item from ‘‘METER SETUP’’ by
pressing the INFO (
/ ) button
repeatedly.
Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO (
/ ) button,
then enter your selection by pressing
the SEL/RESET button.
Multi-Information Display
104
11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu
To Next Page
Loading...
Need help?
General
