The ignition switch must be in the
ON (II) position to use the heaters
and the air ventilation system.
To use the heaters, press the
button. The indicator (red) next to
the button will come on. There are
four settings in the heaters:
HI － Three indicators on.
MID － Two indicators on.
LO － One indicator on.
OFF － All indicators off.
Pressing the
button while the
heater is running will switch the
system to the HI setting air
ventilation mode.
To ventilate the seat, press the
button. The indicator (blue) next to
the button will come on. The air
ventilation system has four settings:
HI － Three indicators on.
MID － Two indicators on.
LO － One indicator on.
OFF － All indicators off.
Pressing the
button while the air
ventilation is running will switch the
system to the HI setting heater
mode.
Follow these precautions whenever
you use the seat heaters and the seat
ventilation:
•
If the engine is left idling for an
extended period, do not use the
seat heaters, even on the LO
setting. It can weaken the battery,
causing hard starting.
FRONT SEAT HEATER AND
SEAT VENTILATION
BUTTONS
INDICATOR
Seat Heaters and Seat Ventilation
159
Instruments and Controls
11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu
To Next Page
Loading...
Need help?
General
