Select the ‘‘Dynamic Range’’ by
turning the interface dial.
To turn ‘‘Dynamic Range’’ on or off,
select ‘‘ON’’ or ‘‘OFF’’ by turning the
interface dial, and then press the
ENTER button.
Angle Mark
When you switch to another angle
while playing a DVD, the angle mark
is displayed in the upper right corner
of the screen.
You can set the system to display or
not display this angle mark.
Select the ‘‘Angle Mark’’ by turning
the interface dial. If you want the
angle mark to be displayed, select
‘‘ON’’ by turning the interface dial,
and then press the ENTER button.
ANGLE MARK
Rear Entertainment System
330
11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu
To Next Page
Loading...
