Indicator Name On/Blinking Explanation Message
Security System
Alarm Indicator
●
Blinks when the security system
alarm has been set.
2 Security System Alarm P. 113
—
System Message
Indicator
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off.
●
Comes on along with a beep when
a problem is detected. A system
message on the multi-information
display appears at the same time.
●
While the indicator is on, press the /
(information) button to see the message
again.
●
Refer to the Indicators information in this
chapter when a system message appears
on the multi-information display. Take the
appropriate action for the message.
●
The multi-information display does not
return to the normal screen unless the
warning is canceled, or the /
button is pressed.
—
CRUISE MAIN
Indicator
●
Comes on when you press the
CRUISE button.
2 Cruise Control P. 248
—
CRUISE
CONTROL
Indicator
●
Comes on if you have set a speed
for cruise control.
2 Cruise Control P. 248
—
To Next Page
Loading...
