Message Condition Explanation
●
Appears if there is a problem with the starting system.
●
As a temporary measure, press and hold the ENGINE
START/STOP button for 15 seconds while depressing
the brake pedal and manually start the engine.
Have the vehicle checked by a dealer.
●
Appears after you unlock and open the driver’s door.
2 Starting the Engine P. 240
●
Appears three seconds after the TO START ENGINE
message appears.
2 Starting the Engine P. 240
●
Appears when the steering wheel is locked.
●
Move the steering wheel left and right after pressing
the ENGINE START/STOP button.
To Next Page
Loading...
