1Blind spot information (BSI) System
*
The BSI alert indicator may not come on under the
following conditions:
• A vehicle does not stay in the alert zone for more
than two seconds.
• A vehicle is parked in a side lane.
• The speed difference between your vehicle and the
vehicle you are passing is greater than 6 mph (10
km/h).
• An object not detected by the radar sensors
approaches or passes your vehicle.
• A vehicle running in the adjacent lane is a
motorcycle or other small vehicle.
The system does not operate when in
(R.
You can change the setting for BSI.
2 Customized Features P. 100, 106
Turn the system off when towing a trailer.
The system may not work properly for the following
reasons:
• The added mass tilts the vehicle and changes the
radar coverage.
• The trailer itself can be detected by the radar
sensors, causing the BSI alert indicators to come on.
Comes on when:
●
A vehicle enters the alert zone from behind
to overtake you with a speed difference of
no more than 31 mph (50 km/h) from your
vehicle.
●
You pass a vehicle with a speed difference
of no more than 12 mph (20 km/h).
Blinks and a beeper sounds when:
You move the turn signal lever in the direction
of the detected vehicle. The beeper sounds
three times.
Comes On
Blinks
BSI Alert Indicator
To Next Page
Loading...
