Need help?Do you have a question about the Acura iRacing ARX-06 GTP and is the answer not in the manual?
General| Brand | Acura |
|---|---|
| Model | iRacing ARX-06 GTP |
| Category | Automobile |
| Language | English |
Describes the car's chassis type and dimensions.
Describes the car's engine and hybrid system.
Provides an overview of the manual's purpose and setup guidance.
Explains initial steps for driving and controls.
Explains how to load and manage car setups in the game.
Explains the steering wheel display and its sections.
Details data shown in the center of the steering wheel display.
Details data shown in the right section of the steering wheel display.
Explains dashboard lights indicating wheelspin or lockup.
Describes how brake lockup is indicated on the steering wheel display.
Explains the function of the shift indicator lights on the steering wheel.
Explains the pit limiter indicator lights on the steering wheel.
Introduction to advanced tuning for users.
Details tire pressure, temperature, and tread remaining settings.
Explains rear wing angle and its effect on downforce and drag.
Describes the tool for calculating aerodynamic values.
Explains the Lift-to-Drag ratio and its importance for efficiency.
Covers front suspension components like Heave Spring, Perch Offset, Damper, and ARB.
Explains how ARB blade orientation affects suspension stiffness and balance.
Describes toe angle and its impact on steering response and stability.
Explains how pushrod length affects front ride height.
Covers rear suspension components like Heave Spring, Perch Offset, Damper, and ARB.
Explains Heave Spring compression from its free length.
Indicates available travel in the Heave Damper before bottoming out.
Describes how ARB diameter affects rear suspension roll stiffness and balance.
Explains how ARB blade orientation affects rear suspension stiffness and balance.
Describes rear toe angle and its impact on straight-line stability and direction changes.
Explains how pushrod length affects rear ride height.
Details front corner suspension settings like corner weight, ride height, and torsion bars.
Details rear corner suspension settings like corner weight, ride height, and torsion bars.
Explains low-speed compression adjustment for shocks and its effects.
Explains high-speed compression adjustment for shocks and bumps.
Describes the effect of HS compression slope on shock behavior.
Explains low-speed rebound adjustment for shocks and its effects.
Explains high-speed rebound adjustment for shocks and its effects.
Discusses low-speed and high-speed damping for roll dampers.
Describes the adjustable roof ID light color.
Covers brake pad compound and front master cylinder settings.
Explains rear master cylinder adjustment and its effect on brake bias.
Details how brake bias affects braking performance.
Introduces hybrid system modes.
Explains the different MGU-K deploy modes (No Deploy, Qual, Attack, Balanced, Build).
Describes the fuel level setting.
Covers traction control gain and slip settings.
Explains gear stack choice and gear speeds.
Details differential settings like ramp angles, clutch friction, and preload.
To Next Page
