Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Your car uses halogen fog light
bulbs. See page for information
on replacing a halogen bulb.
Remove the electrical connector
fromthebulbbysqueezingthe
connector to unlock the tab, then
slide the connector off the bulb.
Push the electrical connector onto
the new bulb.
Use a wrench to loosen the light
assembly’s mounting bolt.
Remove the light assembly from
the bumper.
1.
2.
3.
4.
5.
295
CONTINUED
ReplacingaFogLightBulb
Lights
Maintenance
297
CCOONNNNEECCTTOORR
BBOOLLTT
01/09/07 12:42:44 31S3V610_302
To Next Page
Loading...
