△
Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
You could scratch the wheel if you
putitfacedown.
Locate the jacking point nearest
thetireyouneedtochange.Itis
pointed to by a mark molded
into the underside of the body.
Place the jack under the jacking
point. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
restinginthejacknotch.
12. 13. 14.
Changing a Flat Tire
Taking Care of the Unexpected
318
JJAACCKKIINNGG PPOOIINNTT
EEXXTTEENNSSIIOONN
WWHHEEEELL WWRREENNCCHH
01/09/07 12:45:51 31S3V610_323
To Next Page
Loading...
