▲▼
Press the SEL/RESET button to see
the selections.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘SECURITY RELOCK TIMER’’ and
repeat the procedure again.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
Multi-Information Display
112
０７／０７／０９ ０９：３６：３７ ３１ＳＴＸ６１０ ０１１７
To Next Page
Loading...
